• Die extruded stainless or Galvanized steel
• Stainless wires are corrossion and rust resistant

• Die extruded stainless steel and coated with Teflon®
• Ultra low friction for optimum performance
• Best used with sealed, lined or nosed end caps

• Die extruded stainless steel
• Corrossion and rust resistant

• Die extruded Galvanized steel

Standard Galvanized or stainless steel cables

• Die extruded stainless steel and coated with Teflon
• Low friction for optimum performance 
• Best used with lined or nosed end caps

• Die extruded stainless or Galvanized steel
• Stainless wires are corrossion and rust resistant

• Standard Galvanized or stainless steel cables

• Die extruded stainless steel and coated with Teflo
• Ultra low friction for optimum performance
• Best used with lined or nosed end caps

• Die extruded stainless or Galvanized steel
• Stainless wires are corrossion and rust resistant

• Die extruded stainless or Galvanized steel
• Stainless wires are corrossion and rust resistant

Unyielding performance and powerful braking are the hallmarks of the Racer kit. Designed specifically for road bikes the Racer kit will provide consistent & smooth shifting and amazingly powerful braking. The Racer kit features Jagwire's 4mm derailleur housing lined with its proprietary L3 liner technology. For the brakes we use Jagwire' s legendary Kevlar® reinforced compressionless Ripcord housing w/ proprietary L3 liner.

Tech: Derailleur

• Housing: 4mm reinforced LEX derailleur housing w/ L3 liner
• Housing Length: 1700mm
• Cables: Slick stainless, SRAM® and Shimano®
• Cable Length: Front 2300mm, Rear 2300mm
• Small Parts: Sealed alloy ferrules, donuts, Tube Tops & tips RCK005 Derailleur Housing: 4.5mm Braided

Tech: Brake

• Housing: 5mm kevlar® reinforced compressionless brake housing w/ L3 liner
• Housing Length: 1700mm
• Cables: Slick stainless, SRAM® and Shimano®
• Cable Length: Front 850mm, Rear 1650mm
• Small Parts: Open alloy ferrules, donuts, Tube Tops, tips and 2 EZ-Bend segments

Instructions

Sleek Pro Cross Lite Merging mountain and road brake pad technologies resulted in the creation of the problem solving Sleek Pro Cross Lite. This hybrid brake pad works with either threaded or post-mount cantilever brakes commonly used on cyclocross bikes.

Jagwire's Elite Series of brake pads are compatible with Campagnolo® style caliper braking systems. Featuring Jagwire's high-performance Pro Series Compound the Elite Pro delivers powerful braking and long-lasting performance.

Elite Pro
The Elite Pro road brake pads are compatible with Campagnolo's® traditional caliper brake sets produced since 2000.

Elite Pro Skeleton
The Elite Pro Skeleton road brake pads are compatible with Campagnolo's® Skeleton caliper brake sets produced since 2007.

Download Road Brake Installation Instructions

Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.

Ripcord housing is the flagship of Jagwire's housing lineup. Jagwire's easy-to-install Ripcord kits utilize L3 liner technology to improve overall shift performance by providing smooth cable actuation.

Tech: Derailleur

• Housing: 4.5mm LEX reinforced housing w/ L3 liner
• Housing Length: 2500mm
• Cables: Teflon® coated slick stainless
• Cable Length: Front - 1500mm, Rear - 2300mm
• Small Parts: 3 lined ferrules, 7 nosed ferrules, 6 cable donuts, 1 raincoat boot, 2 cable tips and 2100mm of sealing liner, 2 Tube Tops

Instructions

Switchback Pro Z Pushing the boundaries of design the all new Switchback Pro Z brake pads take brake pad design to the next level. Featuring Jagwire's high-performance Pro Series compound the Switchback Pro Z delivers good looks and long-lasting performance.
Download Mountain Brake Pad Installation Instructions

• Kits include 4.5mm lined end caps
• End caps included

RedZone Disc Brake Pads - Sold in pairs - Springs are included where necessary

• Sealed end caps feature a small rubber o-ring in the base to help prevent dust and water from entering the housing
• Best used with derailleur systems

â–² End caps included

Open end caps have no o-ring or nylon ring

RedZone Lite alloy series disc brake pads use high-grade aluminum to drastically reduce weight.

• Recommended for XC applications
• Not intended for downhill or aggressive trail riding applications
• Sold in pairs
• Springs are included where necessary

Legendary performance and compression-free, the Ripcord housing is the flagship of Jagwire's housing line-up. The Ripcord brake housing will dramatically improve braking power for mechanical disc or V-type brake systems. 30% lighter than traditional brake housing and easy to install; a Ripcord kit combined with L3 liner technology will deliver miles of smooth, precise and powerful performance.

Tech: Brake

• Housing: 5mm Kevlar® reinforced compressionless housing w/ L3 liner
• Housing Length: 3000mm
• Cables: Teflon® coated slick stainless, mountain only
• Cable Length: Front - 1350mm, Rear - 2350mm
• Small Parts: 2 lined ferrules, 2 nosed ferrules, 2 POP ferrules, 3 cable donuts, 2 cable tips and 650mm of sealing liner, 2 Tube Tops

Instructions

• Ideal for rainy, muddy, or high-humidity conditions
• Sold in pairs
• Springs are included where necessary

Instructions

Jagwire's Sleek Pro series of brake pads are compatible with SRAM® and Shimano® style caliper braking systems. Featuring Jagwire's Pro Series compound the Sleek Pro series brake pads will deliver miles and miles of high-performance.

Download Road Brake Installation Instructions

Jagwire's tried and true inline adjusters can be found on millions of bikes from the Coast of America to China and everywhere in between. Giving riders easy and safe access for the derailleur adjustments the need to make on the fly. From the ingenious Rocket to the all new sleek and stylish J2, Jagwire makes adjustments easy.

• Include 4mm and 5mm end caps

Download Inline Adjuster Instructions

Download Mountain Brake Pad Installation Instructions

The Switch series braided cable kits provide that high-tech look riders are looking for to compliment their bikes. Compatible with SRAM® and Shimano® road and mountain systems these versatile cable kits are packed with value and the L3 lined housings will deliver miles of smooth performance.

Tech: Derailleur

• Housing: 4.5mm LEX derailleur housing w/ L3 liner
• Housing Length: 2500mm
• Cables: Slick stainless, double-ended SRAM®, Shimano® & Campagnolo®
• Cable Length: Front - 1500mm, Rear - 2300mm 
• Small Parts: 7 sealed ferrules, 6 cable donuts, 1 raincoat boot, 2 cable tips, 2 Tube Tops

Instructions

The Switch series braided cable kits provide that high-tech look riders are looking for to compliment their bikes. Compatible with SRAM® and Shimano® road and mountain systems these versatile cable kits are packed with value and the L3 lined housings will deliver miles of smooth performance.

Tech: Brake

• Housing: 5mm CGX low-compression brake housing w/ L3 liner
• Housing Length: 3000mm
• Cables: Slick stainless, double-ended SRAM®, Shimano® & Campagnolo® road & mountain
• Cable Length: Front - 1350mm, Rear- 2350mm
• Small Parts: 6 open ferrules, 3 cable donuts, 2 cable tips, 2 Tube Tops

Instructions

 Lined end caps feature a small nylon nose in the base that helps reduce friction and adds protection for Teflon® coated cables

Nosed end caps are considered lined and are commonly used with liner as sealing systems or to add extra potection for cables running through frame fittings

The Hyper series cable kits are an upgrade over OEM housings and are compatible with SRAM® and Shimano® road and mountain systems. These versatile cable kits are packed with value and the L3 lined housings will deliver miles of smooth performance.

Instructions

The Hyper series cable kits are an upgrade over OEM housings and are compatible with SRAM® and Shimano® road and mountain systems. These versatile cable kits are packed with value and the L3 lined housings will deliver miles of smooth performance.

Tech: Brake

• Housing: 5mm CGX low-compression brake housing w/ L3 liner
• Housing Length: 3000mm  Cables: Slick stainless, double-ended road & mountain
• Cable Length: Front - 1350mm, Rear - 2350mm
• Small Parts: 6 open alloy ferrules, 3 donuts, 2 cable crimps, 2 Tube Tops

Instructions
Hyper Mountain Brake
Hyper Road Brake

HyFlow® Quick-Fit hoses feature a pre-installed universal adapter at the caliper end of the hose. The universal adapter connects to the 0 degree Banjo fittings found in Jagwire’s Quick-Fit Fitting Kits designed for many popular systems. Cut the hose once to achieve your two desired lengths, then fit the lever hardware desire to the cut end and thread universal adapter end of the hose onto the Quick-Fit fitting installed on the caliper. Technology of this sort has been proven on motorcycle hydraulic systems for decades and the Quick-Fit caliper adapter brings it to the bicycle.

One Quick-Fit hose and one Quick-Fit Fitting Kit is all you need for one bicycle.

With a simple adapter Jagwire's engineers came up with an ingenious solution that now allows this lightweight externally mounted shifter mount to be compatible with both SRAM® and Shimano® bar end shifting systems.

The BarCon's sleek low profile design shaves precious grams off the weight of a bicycle and its external mounting is adjustment and service friendly. And the external mount makes the BarCon very versatile. While originally designed for triathlon bikes the mount can be used in a variety of applications including H-type handlebars, touring style drop bars and recumbent bike handlebars.

Tech: BarCon 2.0

• SRAM® and Shimano® bar end shifting systems
• Weight: 44 grams per pair
• Housing: 4mm derailleur housing w/ L3 liner
• Housing Length: 2100mm
• Cables: Slick stainless, SRAM® & Shimano®
• Cable Length: Front - 2300mm, Rear - 2300mm
• Small Parts: 4mm sealed alloy ferrules, donuts & tips
• Other: Shims for 22.2mm bars

Brake noodles feature stainless steel tubes with alloy tips

Cutting hydraulic hose with a straight, clean cut is an important part of properly installing any hydraulic hose. The Space Age™ makes it easy to cut hose like pro mechanics. The easy to use channel cradles the hose and holds it perpendicular to the cutting blade for a clean and straight cut every time.

Designed for BMX bikes the Bender Pro kit will provide consistent & smooth braking and amazingly powerful braking. The Bender Pro kit features Jagwire's legendary Kevlar® reinforced compression-free Ripcord housing w/ proprietary L3 liner. Wrapping the linear strands with Kevlar® provides for a safe and reliable cable system.

Tech: Bender Pro Kits

• Housing: 5mm Kevlar® reinforced compressionless brake housing w/ L3 liner
• Housing Length: 1145mm
• Cables: Slick stainless
• Cable Length: 1525mm
• Small Parts: Open alloy ferrules, donuts, tips

Crimps can be tricky to install, but no longer with Jagwire's innovative Non-Crimps. Installation is quick and tool-free. Non-Crimps slide on easily and stay put. The Non-Crimp's rubber cap ensures a firm fit without the need to crush the crimp and cable. When it's service time, Non-Crimps can be removed and used again.

Housings are a big part Jagwire's business, so it only makes sense that there are plenty of housing routing solutions for the newest bikes on the market to those being brought up to date. From our problem solving Rotating S-Hook to frame loop inserts Jagwire has cable routing covered.

Featuring Jagwire's tried and true All-Weather compound the Basics Comp Road is an excellent choice for rehabilitating an older bicycle.
Download Road Brake Installation Instructions

Mountain Brake Pads Compatible with V-brake and cantilever braking systems the Comp Mountain series of brake pads offer a variety of choices. From the colorful Comp Mountain XC pads to the all time classic Comp Mountain Jagwire has all the bases covered. Featuring the tried and true All-Weather compound the Comp Mountain series brake pads will deliver the performance you demand.
Download Mountain Brake Pad Installation Instructions

Installing hydraulic hose fittings shouldn't be done using a hammer. The delicate brass fittings that insert into the end of a hydraulic hose can easily be crimped or not installed flush with the end of the hose resulting in potentially poor brake performance. The Needle Driver™ is a simple to use tool that secures the end of a hydraulic hose and allows for easy and gentle installation of hose fittings.

Perfect for the home mechanic Jagwire's cable cutters are made from durable SK5 steel providing hundreds of clean housing and cable cuts. The included awl is convenient for opening the ends of cut housing.

For use with Shimano STI road levers
Download Rocket Adjusters Installation Instructions

5mm CGX low-compression housing w/ L3 liner

Replacing road brake pad inserts can be a challenge. The Pro Road Pad Press makes removing and installing brake pad inserts a simple and easy task. The included screws allow for easy mounting to any work bench.  Works with both mountain and road cartridge designs.

Combo kits provide a variety of small parts frequently required in the workshop in one convenient, organized and refillable case.

Refill a single compartment of a Combo Kit.

Refill a single compartment of a Combo Kit.  Each refill features the same colors and quantities as included in the combo box.

Refills for common hydraulic system small parts.